If your pump is down or you have a short delivery timeframe: we have completed inventory on hand. Whether you are in need of a complete pump with a motor, replacement wet end or individual parts, we have it in stock!
We shipped out 15 T-Mag AMX Series pumps to a customer for pumping Sulfuric acid in the battery manufacturing industry. These pumps were used to pump from the bulk storage tanks to the production line when the demand of Sulfuric acid was needed. These pumps run 24/7 when in production.
Here is a successful application installed by a distributor in the oilfield. These T-Mag AMX Series pumps were used for the transfer and mix together combinations of different Hydrochloric Acid concentrations. The pumps were then used to transfer the acid for use. These pumps run were operating anywhere form 100 GPM to 175 GPM depending
We worked with a customer to develop a heating skid to keep their product (Mixture of RO Water and Dimethylformamide) temperatures in bulk storage tanks at the proper temperature. When they needed to transfer the product to the production line for use, it was already at the necessary temperature, filtered to specification and ready for
We designed this skid with our T-Mag magnetic drive centrifugal sealless pump, WEG explosion proof motor, Pentair filters and housings and Dixon cam and groove fittings. Through this combination, the skid is now capable of pumping product through a 20 micron pre-filter and then the final .2 micron filter at 50 GPM. Every component was
Here is an exploded view of the AMX Series pump, showing the simplicity of the mag-drive centrifugal pump. It shows the patented buffer system and the rotating flanges to match up bolt holes after installation.