We designed this skid with our T-Mag magnetic drive centrifugal sealless pump, WEG explosion proof motor, Pentair filters and housings and Dixon cam and groove fittings. Through this combination, the skid is now capable of pumping product through a 20 micron pre-filter and then the final .2 micron filter at 50 GPM. Every component was mounted on a stainless steel base with polypropylene piping and valves. The cam and groove fittings were used to connect up to a hose for the flooded suction and the discharge into the customers tote. There are two pre-filters and two final filters in parallel.